Wire mesh cable tray — also known as cable basket tray or wire basket — is the lightest way to route data and low-voltage cables. Standard panel height 35–100 mm, mesh opening 50×100 mm, supplied with tool-free fast connectors and click-in fittings for fast installation.
Because wire mesh tray is open on all sides, cables can enter and leave anywhere along the run, cutting installation time significantly compared with closed trunking systems. It is the preferred choice for data centres, offices, retail and light industrial installations.
YITORCH supplies wire mesh tray in WM35, WM50, WM100 and WM150 heights with matching cut pieces for every wall and floor mounted application. Panels are supplied in 3000 mm lengths and can be cut on site with bolt cutters, then joined with JY-SPL fast connectors.
Standard stock range; custom sizes, slot patterns and hole layouts produced on request.
| Series | WM35 / WM50 / WM100 / WM150 |
| Width range | 50 – 600 mm (50 / 100 / 150 / 200 / 300 / 400 / 500 / 600 mm) |
| Height range | 35 / 50 / 100 / 150 mm |
| Mesh opening | 50 × 100 mm standard (50 × 50 mm available) |
| Wire diameter | Main wire 5.0 – 8.0 mm; cross wire 3.5 – 5.0 mm |
| Panel length | 3000 mm standard (2000 / 2500 mm available) |
| Material | Electro-galvanized steel, hot-dip galvanized, SS304, SS316L, powder coated |
| Standards | IEC 61537 tested load and electrical continuity; safe working load data supplied per height |
Click through to the complete catalogue or send us your drawing for a matched quotation.
We produce to drawing — custom width, height, thickness, slot pattern and finish within 15–25 days.
Panels are cut with ordinary bolt cutters and bends are formed in place — no fabrication workshop needed, ideal for retrofit projects.
JY-SPL fast connectors and splice bars click in without bolts, typically cutting installation labour by 30–40% versus bolted systems.
Elbows, risers, tees, drop-out plates, barriers, floor stands and ceiling clips are stocked for all heights.
Open mesh keeps cables visible for inspection and reduces dust accumulation in office and retail ceilings.
Complete your cable management package with one shipment and one point of responsibility.
Not sure which type or thickness suits your load? Read the Cable Tray Buying Guide — covers type selection, finish comparison, sizing rules and international standards.
Standard heights in electro-zinc and hot-dip finishes are usually dispatched within 7–12 days. Powder coated or stainless versions need 15–20 days depending on quantity.
Wire mesh tray is designed for data and light power cables. For heavy power cable with large bending radius we recommend perforated or ladder type tray instead.
JY-SPL fast connectors maintain electrical continuity between panels; additional bonding jumpers are supplied when the earthing scheme requires documented continuity.
Yes, short sample pieces of any height and finish can be shipped by courier so you can check weld quality and finish before placing the project order.
OEM labelling, barcode labels and neutral packaging are available for distributors with agreed volumes.
Include width, height, thickness, finish, length and quantity for the fastest quote. Drawings and BOQ files welcome.